We have extensive range of products for open-recirculating, once through and closed loop systems to deliver:

• Cleaner heat transfer surfaces
• Control general and pitting corrosion
• Scale and deposit control
• Microbiological fouling control

Chembond proven products and services help to overcome problems associated with poor cooling water treatment programme like:

• Loss of production
• Unscheduled turn around
• Increased maintenance cost
• Poor product quality
• Higher water consumption

Principal objective of treating and conditioning steam generating circuit is to prevent scaling, corrosion, deposition and carry over. Casfor water has the right products to overcome the above problems. We offer robustly developed:

• Corrosion inhibitor
• Oxygen scavenger
• Antiscalant
• pH controller
• Boiler descaling compounds

Raw water and Waste Water Clarification is an important part of pre-treatment of source water making it fit for further treatment and use in plant. We offer a wide range of anionic, catanionic and non-anionic polyelectrolyte’s with application in removal of turbidity in raw water to settlement of solids in waste water and de-watering of sludge. Our products are proven to perform.

With the wider usage of membranes for water treatment comes the need to protect them from deposition and fouling. If the membrane throughout is to be maintained, in addition to pre-filtration, protection against dissolved salts and organic clogging the pores is essential. We offer Antiscalant, Preservative and Cleaning Compounds to give complete membrane protection.

Foam Control: Foaming is generally undesirable as it disturbs production sequences in which liquids particularly water, have an important function as transporting media. Foaming can lead to lower production yields and finished products of poor quality. We offer range of defoamers which have been working successfully in industries such as Asbestos, Sugar, Paper, Dyes, Biotech, Lubricants, Drawing Oil emulsions, etc.

Drinking Water Disinfection: We offer disinfection technologies to mitigate microbial growth in drinking water ensuring e-coli, coliform and pathogenic bacteria are killed results in clean and safe drinking water. Our products also result in clearer and odor free water.

• Coagulation and flocculation are an essential part of raw water treatment as well as wastewater treatment.
• Coagulants are used in the pre-treatment stage to reduce the turbidity of inlet raw water so as to make it easier to treat further before its use in any industry or for municipal supply.
• In wastewater treatment, coagulants and flocculants chemically enhance primary treatment to reduce suspended solids and organic loads from primary clarifiers. This stage combined with secondary treatment helps in achieving treated water quality that is easier to reuse or to meet discharge norms with minimal further treatment.
• We offer a range of anionic, cationic, and non-ionic polyelectrolytes for treatment of raw water and wastewater as well as for de-watering of sludge generated from the effluent treatment plant.
• Our coagulants and flocculants are used across sectors such as Textile, Steel, Dairy, Mining, Paper, Electroplating, Food, Hotels, Municipal, to name a few.

Textile wastewater contains dyes in combination with a variety of contaminants. As environmental legislation requires textile mills to treat their effluent to meet discharge limits, coagulation and flocculation play a vital role in helping the mills meet this requirement.

Kem Fix DC 400: Kem Fix DC 400 is an organic coagulant based on quaternary ammonium polymer. It is particularly effective for decolorization of effluent wastewater containing acid and disperse dyes. COD reduction is obtained as a result of the settling that takes place post treatment.

Kem Fix DC 500: Kem Fix DC 500 is an organic, biodegradable cationic polymer that is highly effective at coagulating highly coloured wastewater in textile and dyes industry. Charge neutralisation occurs at colloidal and suspended particles which tends to eliminate colour, COD and TSS.

Kem Floc 6294: Kem Floc 6294 is a synthetic, medium molecular weight anionic powder flocculant. It has been specifically developed for solid-liquid separation in raw water and wastewater applications. It accelerates the sedimentation rate resulting in rapid dewatering in high sheared applications.

Steel manufacturing consumes large volumes of water across various processes and also generates wastewater containing salts, suspended solids, organic and inorganic compounds, among other contaminants. Chembond’s coagulants and flocculants play a crucial role in the treatment of this wastewater and in rendering it suitable for reuse. This not only reduces the ecological footprint of the industry but saves operating costs.

Kemfix DC 496: Kemfix DC 496 is a cationic coagulant based on quaternary polymeric compounds. It is extremely effective at reducing Turbidity, Oil and Grease, and COD. The product has successfully been used to replace PAC and Alum partially or fully in water treatment applications.

Kemfloc 5276: Kemfloc 5276 is a high molecular weight synthetic flocculant based on a co-polymer of acrylamide and sodium acrylate. It has been extensively used in conjunction with a compatible coagulant in water treatment and in water-based process applications for solid-liquid separation.

• Food processing industries generate wastewater with high biological oxygen demand (BOD) and chemical oxygen demand (COD). Amongst food processing industries, dairy processing industries pose major challenges to treatment of wastewater on two counts – the volume of wastewater generated per day, and the volume of wastewater generated per liter of produced milk (0.2 to 10 liters wastewater per liter of produced milk).
• Wastewater is generated right from the receiving station through milk bottling, cheese, butter, and ice cream production sections. The most important organic materials in the wastewater are fat, lactose and proteins (casein). Cream, butter, cheese, and whey production sections are the major sources of BOD in wastewater.
• Dairy wastewater can be treated by adjusting the pH and using chemical coagulants. The role of coagulants in dairy wastewater treatment is that of de-emulsification (break fat-water emulsions formed due to the use of surfactants, cleaning agents and sanitizers in the process), precipitation, coagulation, and flocculation. This crucial treatment enables the dairy industry to meet its wastewater discharge norms or to afford further treatment of the wastewater for recycle or re-use.
• Chembond’s range of polymeric coagulants and flocculants are formulated and extensively tested to deliver superior and consistent performance to food and dairy processing industries.

Kemfix DC 496: Kemfix DC 496 is a cationic coagulant based on quaternary polymeric compounds. It de-emulsifies, precipitates and coagulates most of the constituents on the dairy wastewater.

Kemfloc 6291: Kemfloc 6291 is a medium molecular weight synthetic flocculant based on a co-polymer of acrylamide and sodium acrylate. It accelerates solid-liquid separation in wastewater in the food processing and dairy industries.